Sound Quality

Sound Quality module is used to limit the permissible value of the processed signal amplitude and to lessen all the background noises while leaving useful signal for the most part intact.

Sound Quality module has two sub panes: Limiter and Noise Reduction.

There are three buttons on Sound Quality tab. They make an overall impact on the two sub panes.

Loads a pre-saved settings of the Sound Quality tab ( .sndq file) into use.

When you click on this button, the Open dialog box will be shown immediately. Specify the file from your hard disk, and click Open.

The file when loaded into use will be changed when user adjusts any of the four sliders on two sub panes. To avoid making unwanted changes on the layout, check the Open as read-only checkbox in the Open dialog box.

Saves current settings of the four sliders on two Sound Quality's sub panes for later use.

When you click on this button, the Save As dialog box will be shown immediately. Type the name of the new file into the File name textbox, and click Save. The file will be saved as a .sndq file.

Reset all four sliders to their default values.

Notes:

Sound quality layout files are saved in .sndq file.

You can set a hot key to quickly enable/disable the Sound Quality tab.