Frequency Morpher is a multiband sound pitch control represented by a Frequency Morpher graph. This feature allows you to apply frequency transformation by modifying the graph displayed in the modules panel.
Fig 01 - Frequency Morpher tab [Advanced panel]
To use Frequency Morpher, click the Freq. Morpher tab on the Advanced Effects Panel. Click the ON/OFF button (1) to activate the Frequency Morpher graph. If the ON/OFF button is red, the feature is available for use.
The Frequency Morpher tab is on the left of the Advanced panel, use the Scroll left button to scroll to the tab.
Below is the explanation of all controls on the Frequency Morpher tab:
Fig 02 - Frequency Morpher graph [Freq. Morpher tab]
In the graph, the abscissa axis represents the input signal frequencies, while the ordinate axis represents the output signal frequencies.
To change the position of a point, click the point and drag it to a different position.
To delete a point, right-click it.
The Frequency Morpher curve is saved as a .fmr file.
You can set a hot key to quickly enable/disable the Frequency Morpher tab.
Frequency Morpher is not available when VCSD is in Game mode.
The Frequency Morpher Curve File file format. The file saves the line on the graph of the Frequency Morpher tab (Advanced panel).