|
|
|
|
 |
 |
|
Home
»
Free online tutorials
»
MP3 Player Morpher Tutorials
»
Capture a movie soundtrack
|
|
|
Because cassette tapes are easily worn out, the best way to protect your music is convert it to digital files stored in your computer or burned on audio CDs. This project will guide you through a few steps to make connection between a cassette player and your computer, then record music from the tape and save it on the hard disk. If you need further detailed information and assistance, please contact our customer service. |
|
 |
|
|
|
- The Recording Control now appears. Select Line In and lower the volume slider for a good recording result. Then close the window.
Note: In order to return to the previous status before the adjustment, repeat all steps above and select Microphone in the Recording Control window.
TOP |
 |
|
|
STEP 3:
Record music from the tape
|
- On your computer, open AV MP3 Player Morpher and click the
Recorder button  on the Player panel. The Record dialog will come up.
TOP |
 |
|
|
- Play the tape on your cassette player. Click the red button on the Record dialog of AV MP3 Player Morpher to begin recording. Then press this button again to stop the process.
- Use the Play and Stop buttons to play back your recording. If you are satisfied with the result, click
Save. The Save As dialog will appear, choose a desired file name and audio format. If you are not satisfied with the result, record again.
- Once finishing, click the Close button to close the Record dialog. Music from the tape is now converted to a digital file and safely stored in your computer.
- You can also open the recorded file in the Editor module to modify it or cut off some unwanted parts. |
|
|
|
|
 |
|
|
in the right corner of your taskbar to open the Windows Volume Control.
