|
-
Detection Speed slider is used to adjust the duration of a part after which Cher Modulation will switch the pitch modulation. The higher the value is, the less your music is affected by Cher Modulation.
-
Threshold slider defines the minimum of sound energy that makes sense for processing. The higher the value is, the less your music is affected by Cher Modulation.
-
Modulation combo boxes. To select a set of semi-tones for the First and Second tones, click the desired set in the corresponding list. For example, value +2 means that the pitch offset will be two semi-tones upward; value -3 means that the pitch offset will be three semi-tones downward.
-
Law of switching tones mode. Click the Law of switching tones mode you want to select. Drums mode performs switching to the next pitch offset at the sound of a drum. Periodic mode performs periodical switching that depends on the Rate value. Once mode performs switching from unpitched signal only once, hereinafter solo goes to output without changing. Twice mode performs switching from the unpitched signal twice, and the rest of the continuous part remains unaltered.
- Note: Remember to turn on the Equalizer to enhance the sound of music. You can either choose an available preset or adjust all frequency bands to your taste.
|
-
-
